LIST OF ALL SP TOOLS ERROR

• Phone is totally dead {Phone no longer responds to power button}

Solution: Use these Link to get How to flash mtk phones

• Phone still not working after flashing {Phone still stuck at Bootlogo or Bootloop}

Solution:
* Ensure there's a formatted SD card in the phone before flashing
* Give up to 5 minutes because first boot takes time
* Boot the phone into recovery mode then wipe data / factory reset
* Remove the battery for 30 seconds then slot back in
* Try a firmware upgrade by using MTK droid tools version 2.3.0 to backup usrdata & cache or copy then from the clockworkmod backup
* Try a  ROM from another source.

• Phone shows white screen, strange colors or divided screen after flashing

Solution: * The ROM/Firmware you flashed is incompatible, get from another source (especially boot.img , logo.bin and uboot.bin)

• Phone automatically disconnecting during flashing

Solution:
* Try a different USB cord, USB port & PC
* Try holding down the Volume down (you could try volume up or both) while connecting the phone to PC for flashing
* Update Driver.

• Sp Flash tool remains at 0% {Phone only shows charging sign}

Solution:
* Manually Install VCOM Drivers

• Error 5054 {BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)}

Solution:
* Ensure you're using the correct files. If you're sure they are, then try formatting before flashing again.

• Initialize scatter failed

Solution: 
* SP Flash tool doesn't accept the name format of your scatter file
* Ensure the scatter file wasn't renamed. If you're certain it wasn't, try a higher version of SP Flash tool

• Error 8038 {Android download  pmt is ready and layout has been change}

Solution:
* SP Flash tool is having trouble writing to certain partitions due to some incompatibility
* Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download
* If Download doesnt work then do a firmware upgrade
* If the MTK backup contains more than one scatter file, retry flashing with the other scatter file.
* If that isn't feasible, try formatting first or use firmware upgrade
* If that doesn't work, open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing "__NODL_" .

• Error 4032 {BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail}

Solution:
* The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Ensure you tick the boxes for only the files present in the ROM you're about to flash
* Probably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using  https://forum.hovatek.com/thread-440.html
* Delete the sp flash tool folder then re-extract
* Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
* If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
* Consider using the latest version of Sp Flash tool
* Format the phone before trying to flash the file(s) again

• Error 5056 {BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)}

Solution:

* The size of a file is larger than the available / possible partition size

* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM

• Error 4001 {S_FT_DA_NO_RESPONSE}

Solution:
* SP flash tool is having difficulty communicating with the device
* Change the USB-port
* Run SP flash tool as Administrator
* Ensure to install the correct drivers.
* Try another PC and USB cord
* Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing

• Soft Keys And Touch Screen Don't Work/Respond

Solution:
* Edit the scatter file using Notepad++ and remove NODL__  (or set is_download: false to is_download: true ) in front of the items you have in the backup folder but aren't listed when you load the scatter file in SP flash tool. This way, these items will become listed when  next you load the scatter file (after saving of course) and therefore flashable

• Error 4008 {BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)}

Solution:
* SP Flash tool encountered an error while attempting to flash files
* Ensure the battery is in the phone and the phone is switched off before connecting for flashing
* Try using a higher version of SP flash tool
* Change the USB cord and port or PC
* Use the format option then download in SP flash tool

• Error 3149 {BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)}

 Solution:
* SP Flash tool was unable to flash files to the phone
* Ensure to run the latest version of SP flash tool as Administrator
* Format first then Download
* Don't tick a box with an unspecified / empty file path
* Ensure the phone is switched off (with a well charged battery in it ) before connecting to PC for flashing
* Try a different PC
* Try a different ROM
* Try a different USB cord

• Error 3168 {BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)}

Solution:
* SP flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info.
* Ensure you're using the ROM for the exact phone model
* Try a higher version of SP flash tool
* Ensure to install the correct drivers for the phone on the PC

• Error 2004 {BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)}

Solution:
* There was an interruption in the communication between SP flash tool and the device
* Try using a different USB cord, port and PC
* Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
* Try a different USB cord
* Try a different port on the PC or another PC
* Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing

• USB device not recognized {USB device not recognized prompt at system tray after connecting  the phone to PC}

Solution:
* The PC is having problems communicating with the phone (often due to interruption, hardware or driver problems)
* Try a different USB cord, PC port or PC

• Error 1013 {BROM ERROR:S_COM_PORT_OPEN Fail(1013)}

Solution:
* SP flash tool encountered an error while attempting to communicate with the phone via the target port
* Try using a different port on the PC
* Ensure the phone is switched off with battery inside before connecting to the PC for flashing
* Try using a different PC
* Try changing the USB cord
* Ensure the phone's USB port isn't damaged

• Error 2020 {BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)}

Solution:
* SP flash tool encountered a problem moving the files to be flashed into the phone's internal SRAM
* Use the latest version of SP flash tool
* In SP flash tool, navigate to Options > Option > Connection > Battery. Set it to "with battery".
* Use the Format all + Download option
* Hold both volume buttons before connecting to the PC for flashing and release once flashing begins

• Error 5007 {BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)}

Solution:
* You're trying to flash an item with an unspecified path (no file selected for the ticked item/box)
* Ensure the scatter file is in the same directory as the other file(s) to be flashed
* Untick any item whose file you do not have or whose path is not specified; yet, is ticked/selected for flashing

• Error 4010 {BROM ERROR : S_FT_FORMAT_FAIL}

Solution:
* The blocks map in the scatter file doesn't match the phone's partition sizes
* Try using the latest version of SP flash tool
* Try using another firmware for the exact phone model

• Error 3182 {BROM ERROR: S_STORAGE_NOT_MATCH (3182)}

Solution:
* The ROM your're trying to flash is not compatible with the target device
* Download the ROM for the exact phone model you're trying to flash
* Ensure to install VCOM drivers on the PC
* Don't tick any box (after loading the scatter file) without a file path / whose corresponding file has not been automatically or manually loaded.

• Error 6012 {BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00}

Solution:
* The Download-Agent being used is incompatible with the phone
* Set Download-Agent to MTK_AllInOne_DA.bin

• Error 1042 {BROM ERROR: S_TIMEOUT (1042)}

Solution:
*: The flashing process took too long so SP flash tool encountered a timeout
* Try flashing one file at a time
* Use the latest version of SP flash tool
* Try using a different PC and USB cord
* Try Infinix Flash tool @ http://www.mokoshalb.com/2016/02/how-to-flash-infinix-phone-using.html

• Error 2 {BROM ERROR: ?? (2)}

Solution:
*: SP Flash tool was unable to communicate with the phone
* Try using a different PC (preferably Windows 7 or lower)
* Install the correct VCOM drivers for your PC's OS and architecture (32 or 64 bit)
* Try another USB cord

• Error 2005 {BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)}

Solution:
* The device attempted to power on before SP flash tool could flash files to it
* Try using a different USB cord, port and PC
* Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
* Try a different USB cord
* Try a different port on the PC or another PC
* Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing

• Error 4058 {BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)}

Solution:
* SP flash tool was unable to locate the partition you're trying to flash to
* Untick any item (box) with a blank or empty Location

• Error 3178 {BROM_ERROR_S_STORAGE_NOT_MATCH (3178)}

Solution:
* The firmware you are trying to flash isnt compatible with your phone
* Try flashing another firmware for your exact phone model/variant

• Error 8406 {SP FLASH TOOL ERROR (8406)}

Solution:
* There is some compatibility problem interrupting the flashing process
* Try flashing another firmware for your exact model
* Update VCOM drivers for the device under Device manager

• Error 1012 {BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)}

Solution:
* The version of SP flash tool you're using doesn't support the size(s) of the file(s) in the firmware / stock ROM.
* Use the latest version of SP flash tool

• Error 3140 {BROM ERROR : S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED}

Solution:
* SP flash tool encountered an error flashing a selected file to a non-specified partition
* Try using the latest version of SP flash tool
* Use the format option then download in SP flash tool

• Error 8417 {BROM ERROR: Initialize scatter file failed}

Solution:
* Please check the scatter file name you load is legal
* The format of the scatter file is invalid
Open the scatter file in Notepad++, the first line must begining with:
############################################################################################################## General Setting #
If there is anything else above this then delete it and save the scatter file.

That's all!, Any of all these will do the right and perfect trick. If you have any problem or error other than those above, you are free to drop it in the Comment Section. Enjoy!!!...